Ground Water Monitoring

Ground water monitoring is the sampling and analysis of important water bodies which may be affected or affect near by industries and ongoing work. The monitoring of ground water can be for various reasons such as to determine the PH levels of the water, aquifer levels, trace element levels in the water and much more. Such bodies of water must be analysed as they could be drinking water sources, or nearby work such as bore hole drilling or construction may interfere the the chemical composition of the water. Monitoring can be done by various instruments including PH scales, dipmeters, mud logging and more. In this section you will find a small but concise range of equipment for the applying to water monitoring.

Grid List

Set Descending Direction

3 Item(s)

  1. Dip Meter Standard Model
    Excl. Tax: £397.00 Incl. Tax: £476.40

    Standard dipmeter for non harsh ground water level monitoring with an array of features including:
    Power Source: 9 volt battery (standard)
    Operating Temperatur: Reel 100 °C / Probe 150 °C
    Reel Seal: Silicone epoxy resin
    Dimensions: 348 x 270 x 200 mm
    Weight: upto 7 kg max
    Probe diameter: 16 mm
    Probe length: 190 mm
    Probe: Stainess steel and Teflon
    Light indicator: Yes
    Noise Indicator: Yes (Buzzer)
    Self Test: Yes (in field)

    Learn More
  2. ATEX Dip Meter
    Excl. Tax: £622.70 Incl. Tax: £747.24

    Standard dipmeter for non harsh ground water level monitoring with an array of features including:
    Power Source: 9 volt battery (Duracell MN1604 specified by the manufacturer)
    Operating Temperatur: Reel -20 to +40 °C / Probe -20 to +85 °C
    Reel: High tensile steel
    Dimensions: 340 x 250 x 200 mm
    Weight: upto 7 kg max
    Probe diameter: 16 mm
    Probe length: 190 mm
    Probe: Stainess steel with EPDM
    Light indicator: Yes
    Noise Indicator: Yes (Buzzer)
    Self Test: Yes (in field)

    Learn More
  3. Interface Meter - ATEX
    Excl. Tax: £862.00 Incl. Tax: £1,034.40

    Dimensions: H 340 mm, W 250 mm, D 200 mm
    Reel weight: 2.00 kg
    Tape weight per 30 mm: 1.28 kg
    Tape
    • Millimetre graduations
    • Kynar jacketed tape
    • Breaking load of 120 kg
    Operating temperature -20°C to +40°C
    Power source 9V Battery (must be Duracell MN 1604)
    Tape accuracy EC Class II standard
    Probe 19 mm diameter
    Probe Stainless steel
    ATEX certificate number SIRA 04ATEX2366
    ATEX certification II 1G Ex ia IIB T4 Ga (-20°C≤ +40°C)

    Learn More

Grid List

Set Descending Direction

3 Item(s)