Mineral Exploration Equipment Archives

Select options

Artline 400XF Paint Marker (Pack of 12) £23.95 ex VAT
Colour
Black Blue Green Red White Yellow
Specification:

Pump action valve
Instant drying
2.3 mm bullet nib
wide range of writing surfaces
Liquid pigment ink
Durable aluminium barrel
Fade resistant
Spare nib included (reversable nib
Select options

CM501 20 Inch Masonry Saw – Electric £3,170.00 – £3,280.00 ex VAT
Options
CM501 20 Inch Masonry Saw - Electric CM501 20 Inch Masonry Saw - Electric with Saw Guide
Specification:
Voltage: 110V Electric
Maximum Cutting Length: 500mm
Blade Capacity: 500mm
Maximum Cutting Depth: 195mm
Weight: 165kg
Select options

CM501 20 Inch Masonry Saw – Petrol £3,170.00 – £3,280.00 ex VAT
Options
CM501 20 Inch Masonry Saw - Petrol CM501 20 Inch Masonry Saw - Petrol with Saw Guide
Specification:
Engine: 6.5 HP Honda
Power Source: Petrol
Maximum Cutting Length: 500mm
Blade Capacity: 500mm
Maximum Cutting Depth: 195mm
Weight: 165kg
Add to cart

Core Tray End Labels – 100 £20.00 ex VAT
Tyvek core tray end labels with pre printed text. Ideal to be attached to the end of core trays to allow geologists and surveyors to make note on the core trays contents. Sold in lots of 100 labels.
Sold Out
Read more

Garmin Etrex 10 GPS £99.99 ex VAT
Technical Spec:
Unit dimensions: 5.4 x 10.3 x 3.3 cm
Display size: 3.6 x 4.3 cm, 2.2″ diag (5.6 cm)
Display resolution, 128 x 160 pixels
Display type: transflective, monochrome
Weight: 141.7 g with batteries
Battery: 2 AA batteries (NOT INCLUDED); NiMH or Lithium recommended
Battery life: 25 hours
Waterproof: yes (IPX7)
Floats: no
High-sensitivity receiver: yes
Interface: USB
Sold Out
Select options

Geo Marker Marking Spray £6.75 ex VAT
Paint Colour
Blue (Fluorescent)Green (Fluorescent)Orange (Fluorescent)Pink (Fluorescent)Red (Fluorescent)Red (Standard)White (Standard)Yellow (Fluorescent)Yellow (Standard)
Geo Marker marking spray for use within the building, construction road, civil engineering, surveying and mining sectors, this spray can be applied to asphalt, concrete, masonary, stone, plaster, wood and even earth whether the surface is wet or dry. Can be used in temperatures down to -20 °C, the spray can utilises a special cap which means 100% of the can will be emptied and won’t give you painted fingers, the paint will also last upto 9 months and can be applied to both wet and dry surfaces. Each can hold 500 ml of paint and is available in 9 bright fluorescent colours.
Select options

Kenometer £350.00 ex VAT
Core Size
H Size N Size
Kenometer core orientation tools, ideal for obtaining alpha and beta angle measurements and readings from core samples, made from tough anodized aluminium with laser etched markings, this instrument is built to last while making obtaining core orientation data as quick and easy as possible.
Add to cart

KM-7 Kappa Magnetic Susceptibility Meter £1,287.00 ex VAT
Specs:
Single mode – Allows for taking individual readings
Scan mode – provides fast information on the distribution of susceptibility over a particular rock object.
Remote mode – allows measured data to be directly transferred to PC using bluetooth or USB connection.

Sensitivity: 1 x 10-6 SI units 1 x 10-5 SI units in scan mode
Measuring Ranges: ±999 x 10-3 SI units with automatically switched accuracy
Operating Frequency: 10 kHz
Display: 4 rows, backlight
Data Memory: 999 readings (without GPS data)
Controls: 4 switches: Escape, Enter, Up, Down
Interface: USB 2.0, Bluetooth
Power Consumption: 8 mA (without Bluetooth or backlight)
Battery: 2 x AAA
Operating Temperature: –20ºC to +60ºC
Dimensions: 165 x 68 x 28 mm
Weight: 250 g including batteries
Accessories: Leather Case, Instruction Manual, USB cable, Disk with comm. program
Select options

KT-20 Magnetic Susceptibility Meter £3,600.00 – £7,281.15 ex VAT
KT-20 Sensor Options
1/10 kHz Dual-Frequency Sensor (rectangle shape)10 kHz Single-Frequency Sensor (circular shape)10/100 kHz Dual-Frequency Sensor (circular shape)3F-32 3-Frequency 32cm Diameter Sensor with Pole, Arm Support, Cable and Rugged Transportation Case IP Induced Polarization/Resistivity Sensor with IP/Resistivity Electronics, Cables and Sample Holder
Specifications:
• Memory: 4 GB Data Input/Output:
• USB and Bluetooth Power Supply:
• 2 x Li‐Ion Rechargeable Batteries
• Operating Temperature: ‐20°C to 60°C
• Display Dimensions: 76 x 47 mm
• Display Resolution: 400 x 240 pixels
• Circular Sensor Dimensions: 66 mm
• Rating: IP65
• Maximum Sample Weight for Density Measurements: 1.0 kg
• Size: 260 x 72 x 60 mm
• Weight: 0.60 kg
• Internal GPS Accuracy: 2.0m
• Internal GPS Receiver Satellite Accessibility: SBAS (WAAS, EGNOS, MSAS)
• Built‐in Camera : 2 Mega Pixels
Select options

Packaging Tape – 10 Rolls £7.95 ex VAT
Tape Colour
Brown Clear
Packaging tape available in two colours, brown and clear, 48 mm and 66 meters in length sold in lots of 10 per colour. Fits most standard size tape guns.
Select options

Rock Chip Trays 20 Compartments £4.75 – £165.60 ex VAT
Quantity
1 Tray 10 Trays 36 Trays
20 compartment rock chip trays made from tough durable plastic, white to prevent light going through and UV and weather resistant, these lightweight boxes weigh only 177 grams each, 52 cm long and 3.5 cm deep with 2.4 x 3.1 cm compartments, they are ideal for the storage of rock chips on mining sites from drilling processes, the snap lock lid seal the box and prevents mixing or cross contamination of samples.

Dimensions:
Box: 52 cm x 5.8 cm x 3.5 cm
Compartments: 2.4 cm x 3.1 cm x 5 cm
Individual Box Weight: 177 grams
Add to cart

Swing Magnetic Pen £4.99 ex VAT
Specification:

– Length: 118 mm
– Stainless steel pivot clip
– Aluminium body
– Magnetic
Select options
Tungsten Carbide Scriber with Magnet – Black £6.50 – £115.60 ex VAT
Quantity
1 Scriber 10 Scribers 20 Scribers
A tungsten carbide scriber for geophysical testing of minerals, performing scratch tests in the field according to the Mohs scale of hardness. Tungsten carbide is at 9 on the mohs scale of hardness and so this scriber is more suitable for harder minerals. Knurling along the body gives users extra grip and the built in magnet will allow for magnetic testing of iron bearing material. The tip is reversible for safe storage and a pocket clip allows for placing in your shirt pocket or along a notebook.
- Length: 150mm (6 inches)
- Tungsten carbide pointed tip
- Permanent magnet is built in
- Knurling for grip
- Reversible tip
Add to cart

UCP Core Depth Markers £0.35 ex VAT
Highly visible core depth markers made from tough, durable ABS plastic in a yellow colour for easy visibility on drilling sites. Each marker has a digital text style imprinted onto its surface, allowing users to mark readings with them, to avoid problems with hand writing. Users can record a wealth of important data related to core logs such as: depth, core recovered, loss or gain and more.

Information

Categories

Weekly Newsletter