“Bringing The Past, Into the Future”

Northern Geological Supplies Ltd
Northern Geological Supplies Ltd

“Bringing The Past, Into the Future”

CM501 20 Inch Masonry Saw – Electric

£3,170.00£3,280.00

Specification:
Voltage: 110V Electric
Maximum Cutting Length: 500mm
Blade Capacity: 500mm
Maximum Cutting Depth: 195mm
Weight: 165kg

Clear
SKU: corsawelec Category:

This is a high performance, robust rock saw with a modern design and highly versatile. The Rock core bench saw is also an ideal core saw, suitable for cutting core samples in laboratories or on mining, quarry, drilling or surveying sites, often in remote locations. Also suitable for cutting a wide variety of small to medium sized materials such as brick, blocks, concrete, natural stone, refractory products, roof tiles, masonry materials etc.

The core saw is the 110 volt (single phase) version of theof our petrol powered saw, it comes with a 500 mm blade guard, thereby providing a very generous 195 mm (8") cutting depth when fitted with a 500 mm (20") diameter blade, or 165 mm (6.5") depth of cut with a 450 mm (18") diameter blade. The machine requires a 10 KVA continuous supply and should not be used in conjunction with extension leads as this could result in loss of power or even damage the machine.

The Clipper CM501 has a combination of a winding handle and foot pedal depth control/blade adjustment provides the operator with alternative ways to cut/step cut materials, whilst the built in water pump permits wet or dry cutting as required. The conveyor cart of the CM501 includes friction resistant tilted wheels, providing better cart stability and improved accuracy of cut. The double lifting rails/fork lift eyes fitted to the CM501 makes it easy to move from location to location.

Our core bench saw has a combination of a winding handle and foot pedal depth control/blade adjustment provides the operator with alternative ways to cut/step cut materials, whilst the built in water pump permits wet or dry cutting as required. The conveyor cart of the saw includes friction resistant tilted wheels, providing better cart stability and improved accuracy of cut. The double lifting rails/fork lift eyes fitted, which makes it easy to move from location to location.

• Winding handle head adjustment
• 'Stay level' blade guard ensuring maximum guarding of the blade at all times and increased visibility of the work piece
• Built in water pump for wet cutting

The machine can also be fitted with different for plugs for use in different countries, please enquire.

Reviews

There are no reviews yet.

Be the first to review “CM501 20 Inch Masonry Saw – Electric”

Your email address will not be published. Required fields are marked *

2 × two =