- “Bringing The Past, Into the Future”
- +44 (0) 1204 388754
PRODUCTS BY WEIGHT
BOX SETS
PLASTIC DISPLAY PRODUCTS
PRODUCTS BY WEIGHT
BOX SETS
PLASTIC DISPLAY PRODUCTS
£4,500.00 – £4,900.00 ex VAT
The PMG-2 proton magnetometer and gradiometer are primarily designed for conducting field surveys of mineral deposits, searching for buried ferrous and other magnetic objects, and locating buried foundations and walls in archaeological sites.
The device is supplied in two variants:
Gradiometer is a fully equipped proton magnetometer and a gradiometer with two sensors to measure the gradient of the Earth’s magnetic field.
Magnetometer is a cheaper version that does not allow measurement of the gradient and is equipped with only one sensor.
Lead time of a few weeks.
We ship to all 50 states, Washington DC.
All orders are shipped with a UPS tracking number.
Always free shipping for orders over US $200.
During sale periods and promotions the delivery time may be longer than normal.
Elessi will accept exchanges and returns of unworn and unwashed garments within 30 days of the date of purchase (14 days during the sales period), on presentation of the original till receipt at any store where the corresponding collection is available within the country of purchase.
Your return will usually be processed within a week to a week and a half. We’ll send you a Return Notification email to notify you once the return has been completed.
Please allow 1-3 business days for refunds to be received to the original form of payment once the return has been processed.
Give us a shout if you have any other questions and/or concerns.
Email: contact@mydomain.com
Phone: +1 (23) 456 789
The PMG-2 proton magnetometer and gradiometer are primarily designed for conducting field surveys of mineral deposits, searching for buried ferrous and other magnetic objects, and locating buried foundations and walls in archaeological sites. Additionally, the PMG-2 can measure the Earth’s magnetic field over a long period and detect daily variations in the magnetic field. The PMG-2 is a rugged, dependable, water, and dust-resistant device that is user-friendly. It can measure the Earth’s magnetic field in the range of 20,000 to 100,000nT, and its FLASH memory has a capacity of up to 1,800,000+ measurements. The data collected by the PMG-2 can be easily transferred to a computer via the USB interface. When measuring on a marked grid, the PMG-2 can automatically increment the position for each measurement on the marked grid line, eliminating the need to reset the position before each measurement. However, the operator must change the line when switching to a new line.
The device is supplied in two variants:
Gradiometer is a fully equipped proton magnetometer and a gradiometer with two sensors to measure the gradient of the Earth’s magnetic field.
Magnetometer is a cheaper version that does not allow measurement of the gradient and is equipped with only one sensor
Lead time of a few weeks.
Weight | N/A |
---|---|
Variant | Gradiometer, Magnetometer |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Currently delivered in RAL 7034
You can also view our full range of compass clinometers by clicking here.
The GS-512i is a 512 channel gamma-ray spectrometer which is designed to aid with field exploration of mineral deposits via gamma spectrometry. This functions by measuring concentrations of naturally occurring isotopes K (potassium), U (uranium) and Th (thorium). The GS-512i allows users to set up eight Regions of Interest (ROI’s) to measure pulse counts in channels and energy ranges defined by the user. The GSP-3 version is standard for this product.
See below for more information
Technical Data:
– Compass circle diameter 50 mm
– Precision compass needle (balanced for zone 1 – magnetic north)
* Can be balanced for use in other zones. Done automatically upon purchase or request.
– Graduation interval 1° (1g)
– Accuracy < 0,1° (0,2g)
– Numbering continuous from 10° to 10° (10g to 10g)
– Declination adjustment ±30°
– Vertical circle diameter 25 mm
– Graduation interval of inclinometer 5° (5g)
– Readings to 1° (1g)
– Graduation range quadrantal 235°
– Numbering from 20° to 20° (20g to 20g)
– Circular level 30’/2 mm
– Tracing edge 60 mm
– Dimensions of closed compass 74x96x25 mm
– Includes leather case
– Weight 275g
You can also view our full range of compass clinometers by clicking here.
Specs:
Single mode – Allows for taking individual readings
Scan mode – provides fast information on the distribution of susceptibility over a particular rock object.
Remote mode – allows measured data to be directly transferred to PC using bluetooth or USB connection.
Sensitivity: 1 x 10-6 SI units 1 x 10-5 SI units in scan mode
Measuring Ranges: ±999 x 10-3 SI units with automatically switched accuracy
Operating Frequency: 10 kHz
Display: 4 rows, backlight
Data Memory: 999 readings (without GPS data)
Controls: 4 switches: Escape, Enter, Up, Down
Interface: USB 2.0, Bluetooth
Power Consumption: 8 mA (without Bluetooth or backlight)
Battery: 2 x AAA
Operating Temperature: –20ºC to +60ºC
Dimensions: 165 x 68 x 28 mm
Weight: 250 g including batteries
Accessories: Leather Case, Instruction Manual, USB cable, Disk with comm. program
0.1 stroke high-tech disposable fibrepen with metal-framed round tip, in 4 stroke widths, water resistant once dry, lightfast pigment ink. Includes cap with a stainless steel clip.
For more information please see below.
A5 in size, the card contains relevant geological data on both sides. One side contains over 40 different sedimentary logging symbols such as ‘Breccia’, ‘cross bedding’, ‘tuff’, and so forth.. On the opposite side, a wide variety of common geological mapping symbols are printed including ‘inclined strata’, ‘faults’, ‘mineral veins’ etc. Also includes a geological time scale.
Fabric/Materials:
– Cotton canvas
Item Dimension:
– 32x35x9cm
Specification:
– Length: 118 mm
– Stainless steel pivot clip
– Aluminium body
– Magnetic
These polycarbonate plastic goggles made from tough durable plastic are impact resistant against the majority of chips and fragments, more so than glass. The goggles are suitable for high hazard environments and are ideal for geologists working in the field breaking rock or extrating fossils & minerals. They are also well suitaed for miners, surveyors, builders and many other professions where the risk of injury to eyes may occur.
This Scan Industrial Safety Helmet is manufactured from high density polyethylene to provide excellent head protection. Head protection is essential for site workers for protection from falling objects or striking against fixed obstacles. This helmet features a rain gutter to channel water away from the helmet and face. Please note this product is too large for regular post and must be delivered using a courier service.
n
nEasily adjustable to fit head size of between 520 and 620mm.
n
nConforms to EN397:1995
n
nHelmet weight: 350g.
An ideal, inexpensive backpack with three pockets suitable for carrying and storage of specimens, tools and equipment while in the field.
n
n* Size: 32.5 x 35 x 14.5 cm
n
n* Colour: Blue
n
n* Weight : 0.8kg
n
n* Features: Adjustable straps, button close front pocket, Strap close side pockets, made from heavy duty cotton canvas.
High-tech disposable fibrepen with metal-framed round tip, in 4 stroke widths, water resistant once dry, lightfast pigment ink. Includes cap with a stainless steel clip.
For more information see below.
Spec:
Size – 4 3/4 in x 7 1/2 in
Page Pattern – Geological
Binding – Sewn
Cover – Fabrikoid (yellow)
Number of Pages – 160
Weight – 0.65 lbs
Number of Sheets – 80
Out of stock
An inexpensive plastic hand lens made in the USA which boasts three, x 5 magnifiers, which can overlap twice or three times to give you x 10 and x 15 magnification respectively. This hand lens is small with no sharp edges and made from plastic suitable for children over the age of 6. A white body houses the magnifiers which can fold away inside. An excellent items for children to view the world up close around them such as fossils, crystals, insects, plants and more.
Ruper 5008 hand lens magnifier with powerful x 20 magnification and a moderate 15 mm wide diameter field of view. An excellent loupe manufactured in Japan, which uses doublet optics with achromatic design to significantly reduce abrasion in your field of view. Renowned in various sectors and fields by their name, this magnifier is manufactured from stainless steel and is unfinished, giving it a texture which provides extra grip making it useful for those particularly working in field conditions where weather may affect your grasp. The loupe is suitable for students, professionals and academics alike, particularly those of you in the fields of geology, gemology, archaeology, antiques dealings, entomology, watchmaking and more.
Introducing the GEO Premier, an authentic triplet hand lens crafted from top-grade triplet optical glass. It features three distinct layers of glass and provides a 10x magnification with 20.5 mm viewing field. This ensures a comprehensive view of a sample’s specific area. Housed in sturdy metal, it is built to withstand rugged field use, capable of enduring bumps and drops. The hexagonal shape enhances grip and handling, especially in damp conditions. Additionally, one end of the magnifier features a bar and metal loop for attaching a lanyard or thread (not included). The hand lens includes a leather case and stands as an outstanding tool suitable for both students and professionals alike.
Reviews
There are no reviews yet.