FIELD EQUIPMENT Archives - Geology Superstore

10 Meter Measuring Tape £8.17 ex VAT
A 10 meter long tape measure by RST made from high tensile fiberglass to withstand rough terrain, damp soils and cold weather and is easily cleaned afterwards. The tape is 13 mm wide with large text font on a white background for easy reading and is ideal for use on site, mines, quarries and in the field. An end hook will allow you to dig into soil or hook onto rocks or building corners so that you can measure out your self, the 3 geared wind up mechanism then allows you to quickly and easily wind the tape back up faster than previous models.

Add to cart
100 Meter Measuring Tape £46.63 ex VAT
A 100 meter long tape measure by RST made from high tensile fiberglass to withstand rough terrain, damp soils and cold weather and is easily cleaned afterwards. The tape is 13 mm wide with large text font on a white background for easy reading and is ideal for use on site, mines, quarries and in the field. An end hook will allow you to dig into soil or hook onto rocks or building corners so that you can measure out your self, the 3 geared wind up mechanism then allows you to quickly and easily wind the tape back up faster than previous models. This model due to its large reel, has an open case design, which gets rid of unnecessary weight making it lighter to carry. A comfortable handle has also been included to make carrying the tape measure much easier.

Add to cart
15 Meter Measuring Tape £9.06 ex VAT
A 15 meter long tape measure by RST made from high tensile fiberglass to withstand rough terrain, damp soils and cold weather and is easily cleaned afterwards. The tape is 13 mm wide with large text font on a white background for easy reading and is ideal for use on site, mines, quarries and in the field. An end hook will allow you to dig into soil or hook onto rocks or building corners so that you can measure out your self, the 3 geared wind up mechanism then allows you to quickly and easily wind the tape back up faster than previous models, at 15 meters long, it is ideal for large areas but not so much that you have a cumbersome tape measure to carry around.

Add to cart
Sold Out

191mm x 25 mm tie on waterproof labels £5.00 ex VAT
Specification:
100 waterproof field labels.
191 mm x 25 mm
Single hole for tie on to be add
Ties not included.
Labels can be over printed to suit your needs.

Read more

Out of stock
Sold Out

191mm x 25mm self tie waterproof labels £6.00 ex VAT
Specification:
100 self tie waterproof field labels
191mm x 25mm
Most labels can be over printed to suit your needs.

Read more

Out of stock
20 Meter Measuring Tape £10.04 ex VAT
A 20 meter long tape measure by RST made from high tensile fiberglass to withstand rough terrain, damp soils and cold weather and is easily cleaned afterwards. The tape is 13 mm wide with large text font on a white background for easy reading and is ideal for use on site, mines, quarries and in the field. An end hook will allow you to dig into soil or hook onto rocks or building corners so that you can measure out your self, the 3 geared wind up mechanism then allows you to quickly and easily wind the tape back up faster than previous models. At twenty meters, this measuring instrument will allow for larger site recordings.

Add to cart

1 in stock
30 Meter Measuring Tape £16.32 ex VAT
A 30 meter long tape measure by RST made from high tensile fiberglass to withstand rough terrain, damp soils and cold weather and is easily cleaned afterwards. The tape is 13 mm wide with large text font on a white background for easy reading and is ideal for use on site, mines, quarries and in the field. An end hook will allow you to dig into soil or hook onto rocks or building corners so that you can measure out your self, the 3 geared wind up mechanism then allows you to quickly and easily wind the tape back up faster than previous models. The large area that can be set out is standard among initial investigation projects.

Add to cart
5 Meter Measuring Tape £11.29 ex VAT
The RST sit pro tape allows you to measure out 5 meters length total on a 32 mm wide steel blade with both imperial and metric units of measurements. A robust plastic and rubberised case will protect this tape from drops, bumps and knocks on site or in the field and the heavy duty locking mechanism will easily hold the tape so that you can obtain your readings. It’s small handy size and belt clip make it an excellent choice for higher education field work use, site use, construction and wood working use.

Add to cart
50 Meter Measuring Tape £22.59 ex VAT
A 50 meter long tape measure by RST made from high tensile fiberglass to withstand rough terrain, damp soils and cold weather and is easily cleaned afterwards. The tape is 13 mm wide with large text font on a white background for easy reading and is ideal for use on site, mines, quarries and in the field. An end hook will allow you to dig into soil or hook onto rocks or building corners so that you can measure out your self, the 3 geared wind up mechanism then allows you to quickly and easily wind the tape back up faster than previous models.

Add to cart
50 Meter Measuring Tape (Open Framed) £27.97 ex VAT
Introducing the RST 50-meter tape measure, crafted from durable high tensile fiberglass for exceptional resilience against rugged terrains, damp soils, and cold weather. This tape measure is designed to withstand the toughest conditions while offering effortless cleaning.

Enhanced with a 3 geared wind-up mechanism, this model allows for quick and efficient retraction, surpassing the speed of previous versions. Its large reel design incorporates an open case, eliminating unnecessary weight and resulting in a lighter overall carry. Moreover, a comfortable handle has been thoughtfully added to enhance portability and ease of use.

Experience the convenience and durability of the RST 50-meter tape measure—an indispensable tool for professionals in diverse fields. This is one of many measuring devices we offer. You can view our full range here.

Add to cart
Sold Out

70 mm x 40 mm tie on waterproof labels £5.00 ex VAT
Specification:
100 waterproof field labels.
70 mm x 40 mm
Single hole for tie on to be add
Ties not included.
Labels can be over printed to suit your needs.

Read more

Out of stock
A3 Landscape Pro WeatherWriter® Waterproof Clipboard £36.45 ex VAT
For over 20 years, the A3 Landscape Pro WeatherWriter® Waterproof Clipboard, made in the UK, has been the trusted tool for safeguarding your notes from rain and wind. On inclement days, simply release the hook & loop fastening to automatically open up the sprung, clear hood. This allows you to read and write on your papers while keeping them protected. On dry days, close the WeatherWriter® PRO and use it as a regular clipboard by turning it onto its back. The versatility and quality of the Pro WeatherWriter® makes it the ideal tool for your note taking needs.

Add to cart

1 in stock
A4 Aluminium Clipboard £7.99 ex VAT
An A4 aluminium clipboard which is perfect for writing whilst on the go. Its 115mm diameter clip ensures that your paper will remain securely fastened to the board so you don’t have to worry about losing any important documents. The board measures 317 x 228mm and can hold over 100 sheets. The board is robust and combined with the smooth surface, ensures good support for all your notes. The aluminium body ensures long lasting strength and durability and the hanging hook allows for wall storage, improving both visibility and convinience.

Add to cart
A4 Landscape Pro WeatherWriter® Waterproof Clipboard £31.20 ex VAT
The WeatherWriter® waterproof clipboard is great to help protect your notes from the rain and wind when out in the field. This version is set up landscape and can hold up to A4 sized sheets of paper. It comes equipped with a transparent waterproof hood that can be closed and fastened with a Velcro fastening. This version comes with clips at the top only and is available in black.

Add to cart
Sold Out

A4 laser printable waterproof paper (250 sheets) £35.72 ex VAT
A4 Aqualaser plain paper pack of 250 sheets of laser printable and photocopiable waterproof field paper. Ideal for producing maps, charts plans and notices for use in the wet. 296mm x 210mm.

Read more

Out of stock
Acid Bottles £0.60 ex VAT
Clear plastic acid bottles with a dropper lid and screw on cap, made from durable plastic, the bottle can carry hydrochloric acid for you to use in the lab or field, allowing you to determine calcium carbonate rocks such as calcites or limestones. The bottles hold 25 ml of liquid and are clear.

Add to cart

243 in stock
Ammonite Logo Double Hand Lens £2.00 ex VAT
This compact hand lens comes equipped with two magnifiers, each offering a 5x magnification. What sets it apart is the ability to overlap these magnifiers, providing a total magnification power of 10x. Crafted from durable plastic, the magnifier is built to endure accidental drops with no sharp edges or corners. Designed for children aged 6 and above who are developing an interest in nature, this practical magnifier allows both you and them to explore the intricate details of the outdoors, from plants and insects to small amphibians, rocks, and fossils. Ideal for educational and charitable organisations catering to young children. The black body features a white ammonite logo to spark their curiosity.

Add to cart
Aqua-Proof Field Notebook A5 (B) £11.70 ex VAT
Ideal for use in the field in all conditions.

Dimensions: A5 = 148mm × 210mm
Weight: 144 grams
Paper gauge: 135g
Pages: 32 pages
Pages: Blank
Water/Grease resistant

Add to cart

17 in stock
Aqua-Proof Field Notebook A5 (Graph) £11.70 ex VAT
Ideal for use in the field in all conditions.

Dimensions: A5 = 148mm × 210mm
Weight: 144 grams
Paper gauge: 135g
Pages: 32 pages
Page printing: 5mm graph/blank
Water/Grease resistant

Add to cart
Aqua-Proof Field Notebook A5 (L/B) £11.70 ex VAT
Ideal for use in the field in all conditions.

Dimensions: A5 = 148mm × 210mm
Weight: 144 grams
Paper gauge: 135g
Pages: 32 pages
Water/Grease resistant

Add to cart

18 in stock
Aqua-proof Geological Field Notebook £14.00 – £625.00 ex VAT
Ideal for use in the field in all conditions.

Dimensions: A5 = 148mm × 210mm
Weight: 144 grams
Paper gauge: 135g
Pages: 32 pages
Page Print: Alternating lined and blank.
Back Page contains sedimentary and mapping symbols
Water/Grease resistant

Select options

95 in stock
Archaeological Trowel £38.54 ex VAT
High durable, lightweight archaeological trowel for the careful unearthing and extraction of remains, jewellery and items. Made from stainless steel and supplied with a leather holster it is suitable for use by both archaeologists and paleontologists.
- ATH45 blade size: 4 1/2″ X 2 1/4″ (11,43cm X 6,35cm)
- Ultra-durable holster has long-wearing insert that protects the blade and clothing
- Riveted belt loop for secure and easy portability
- Made in the U.S.A.
- Ideal for archaeological and paleontology work
Add to cart
1 in stock
Artline 400XF Paint Marker (Pack of 12) £31.20 ex VAT
The Artline 400XF Paint Marker has a tough aluminium barrel. It controls paint flow using a pump valve action for consistent output on any surface. It comes in six different colours and a 2.3 mm acrylic fibre bullet nib for clear writing.

The Artline 400XF markers use solvent-based, Xylene-free ink. It dries quickly and resists water and fading, ideal for indoor and outdoor use. It works on metal, glass, plastics (except EPS), ceramics, wood, rubber, laminates, and smooth stone or rock.

Perfect for the mining industry, these markers are great for labelling drill cores with smooth surfaces. Geologists can easily ID samples and add notes. They offer indelible marking and strong weather resistance. Sold in packs of twelve.

Select options
Brunton Axis Transit Compass Clinometer 0-360 (5012) £640.00 ex VAT
Technical Specification

• Azimuth Dial – 1x 0-360 degrees on dial

• Unique dual axis hollow hinge allows for easy and intuitive measurements of any line or plane.

• The lid rotates 360˚ around both axes, making measurements possible for any surface including overhangs. The lid can extend or create the measurement surface itself.

• The default orientation of compass North makes this the only transit in the world that can measure strike & dip simultaneously. A simple rotation of the azimuth ring also allows simultaneous measurement of dip angle & dip direction if that is preferred.

• A secondary axis of rotation and lid protractor allows simultaneous measurement of trend & plunge.

• The hollow hinge/sighting tube allows for direct horizontal and vertical sighting measurements.

• Hinge dial enables dip angle measurements and also serves as a versatile protractor.

• Excellent contact and sighting measurement capabilities.

• Dual long-level bubbles allow the user to level the compass from the sides and bottom.

• The flat bottom allows for easier dip angle and dip azimuth measurements at low angles.

• The needle can be set to lock automatically, allowing for accurate readings.

• The precision NdFeB disc magnet provides very accurate readings and resists demagnetization.

• Our magnetic needle can be balanced for use almost anywhere in the world .

• Induction dampening makes for a quick-settling needle.

• A sapphire jewel bearing allows for smooth needle movement throughout the life of the instrument.

• The needle lock button can lock or free the needle, depending on the model.

• The internal components are sealed with an O-ring for improved resistance to dust and water.

• Each comes with a protective leather case.

• Made in the USA

There may be a few weeks lead time for this product. Please inform if you need specific balancing.

You can also view our full range of compass clinometers by clicking here.

Add to cart
Brunton Axis Transit Quad Compass Clinometer (5011) £640.00 ex VAT
Technical Specification

• Quadratic Dial – 4x 0-90 degrees on dial

• Unique dual axis hollow hinge allows for easy and intuitive measurements of any line or plane.

• The lid rotates 360˚ around both axes, making measurements possible for any surface including overhangs. The lid can extend or create the measurement surface itself.

• The default orientation of compass North makes this the only transit in the world that can measure strike & dip simultaneously. A simple rotation of the azimuth ring also allows simultaneous measurement of dip angle & dip direction if that is preferred.

• A secondary axis of rotation and lid protractor allows simultaneous measurement of trend & plunge.

• The hollow hinge/sighting tube allows for direct horizontal and vertical sighting measurements.

• Hinge dial enables dip angle measurements and also serves as a versatile protractor.

• Excellent contact and sighting measurement capabilities.

• Dual long-level bubbles allow the user to level the compass from the sides and bottom.

• The flat bottom allows for easier dip angle and dip azimuth measurements at low angles.

• The needle can be set to lock automatically, allowing for accurate readings.

• The precision NdFeB disc magnet provides very accurate readings and resists demagnetization.

• Our magnetic needle can be balanced for use almost anywhere in the world .

• Induction dampening makes for a quick-settling needle.

• A sapphire jewel bearing allows for smooth needle movement throughout the life of the instrument.

• The needle lock button can lock or free the needle, depending on the model.

• The internal components are sealed with an O-ring for improved resistance to dust and water.

• Each comes with a protective leather case.

• Made in the USA

There may be a few weeks lead time for this product. Please inform if you need specific balancing.

You can also view our full range of compass clinometers by clicking here.

Add to cart
Brunton Ball and Socket Mount £92.00 ex VAT
Technical Spec:
* Aluminum & brass construction
* Standard 1/4 – 20 thread
* Fits Brunton transits exclusively
* Fits: All Brunton Transit models, including the Geo Transits and Com-Pro models.

You can also view our full range of compass clinometers by clicking here.

Add to cart

1 in stock
Brunton Compro Transit (F-5008-050) £299.99 ex VAT
The Brunton compro composite transit compass is the latest version of the compro line. It is ultra light weight, tough and accurate. The perfect small, lightweight instrument for geological field mapping and exploration. The unit contains a number of features and mechanisms to obtain accurate readings and work for a lifetime, all safely housed and sealed with an o-ring to protect against dust and water damage. The needle can be balanced for use anywhere in the world and the NdFeb disc is highly accurate and will resist demagnetisation. In additional to a host of other features, this particular model is ideal for those who after after accuracy, ease of transport and on a budget.

Specifications:
- measurement style: Strike and Dip
- dimensions: 10 x 7 x 3 cm
- weight: 162g
- azimuth: +/- 1/2˚ w/ 1˚ graduations
- internal clinometer: +/-1/2˚ w/ 1˚ graduations
- percent grade: 5% graduations
- declination adjustment: +/- 180˚
Add to cart
1 in stock
Sold Out
Brunton Geo Lite Transit Compass Clinometer £70.00 ex VAT
Features:
- Transit-style direct read azimuth system
- Slender needle for a more accurate read
- Fixed plumb-style clinometer–unaffected by declination adjustment
- Hinge clinometer enables dip/dip azimuth measurements
- Integrated protractor for plotting data on a field map
- Bubble level for accurate strike measurement
- 2˚ Resolution for azimuthal readings (strike, dip azimuth, directional bearings)
- 5˚ resolution for clinometer readings
- Brunton EverNorth Magnet resists demagnetization over time
- Map Magnifier
- Sighting Mirror for accurate bearings
- Tool-free declination adjustment
- Romer scales included for easy integration with handheld GPS unit
- Flat bottom for accurate strike and dip measurements at low angles
- Hot stamped base plate for improved durability
- Recycled glass-filled PA lid for increased durability
- Northern Hemisphere only
- Made in the USA in Riverton, WY
You can also view our full range of compass clinometers by clicking here.
Read more
Out of stock
Brunton Geo Transit Compass Clinometer 0 – 360 (5010) £608.00 ex VAT
Technical Specification:
* Azimuth dial 0 360°
* Adjustable needle locking mechanism
* Hinge clinometer with 1° increments for 1/2° readable dip measurements
* Two long-level bubbles on the outside of the aluminum housing for no guess leveling from the sides or the bottom
* Cover hinge assembly designed for increased durability
* “Buck Horn” style sights for increased accuracy when sighting azimuth or vertical angles
* Single NdFeB magnet resists demagnetization better than any other type of magnet
* Azimuth accuracy ±1/2° with 1° graduations
* Vertical angle accuracy ±1/2° with 1° graduations and 10 minute vernier
* Vertical angle measurements to ±90° or 100% grade
* Percent grade scale with increments of 5%
* Induction dampened needle for quick, accurate readings
* Sapphire jewel bearing allows for smooth needle movement
* Magnetic declination adjustment allows for east or west declination settings to +/-180°
* Precision aligned mirror with convenient “see-through” sighting capability
* Aluminum billet body assembly makes the GEO nearly indestructible
* 6061-T6 hard anodized aluminum body for permanent color and scratch resistance
* Ball & socket tripod mount is centered for increased accuracy of rotation
* O-rings make the GEO Waterproof for increased reliability
* Leather case included
* Overall dimensions: 9.6 x 7 x 3.3cm
* Weight: 362 grams
* Made in the USA

You can also view our full range of compass clinometers by clicking here.

Add to cart
Brunton Geo Transit Quad Compass Clinometer (5009) £608.00 ex VAT
Technical Specification:
* Quadratic dial – 4x 0-90 degrees on dial
* Adjustable needle locking mechanism
* Hinge clinometer with 1° increments for 1/2° readable dip measurements
* Two long-level bubbles on the outside of the aluminum housing for no guess leveling from the sides or the bottom
* Cover hinge assembly designed for increased durability
* “Buck Horn” style sights for increased accuracy when sighting azimuth or vertical angles
* Single NdFeB magnet resists demagnetization better than any other type of magnet
* Azimuth accuracy ±1/2° with 1° graduations
* Vertical angle accuracy ±1/2° with 1° graduations and 10 minute vernier
* Vertical angle measurements to ±90° or 100% grade
* Percent grade scale with increments of 5%
* Induction dampened needle for quick, accurate readings
* Sapphire jewel bearing allows for smooth needle movement
* Magnetic declination adjustment allows for east or west declination settings to +/-180°
* Precision aligned mirror with convenient “see-through” sighting capability
* Aluminum billet body assembly makes the GEO nearly indestructible
* 6061-T6 hard anodized aluminum body for permanent color and scratch resistance
* Ball & socket tripod mount is centered for increased accuracy of rotation
* O-rings make the GEO Waterproof for increased reliability
* Leather case included
* Overall dimensions: 9.6 x 7 x 3.3cm
* Weight: 362 grams
* Made in the USA

You can also view our full range of compass clinometers by clicking here.

Add to cart
Brunton Non Magnetic Tripod £136.00 – £205.00 ex VAT
Technical Spec:
* Adjustable from 48cm to 122cm
* Aluminum & brass construction
* Standard 1/4 – 20 thread
* 2-section adjustable legs
* Pointed tips at the end for no-slip use
* Use with Ball & Socket mount
* Weight: 680 grams
* Optional – Ball and Socket Mount

You can also view our full range of compass clinometers by clicking here.

Select options
Brunton Omni-Sight Compass £190.00 ex VAT
- Illuminated Readout: Light piping gives a clear bright readout even in lowlight
- Rare Earth Magnet: Resists magnetic interference and will not lose polarity.
- All-In-One Scales: 360 Degree azimuth, reciprocal bearing, quadrants, MILS.
- Dimensions: 63.5 x 89 x 12.7 mm
- Weight: 335 grams
- Features: 1 Degree resolution Made: in the U.S.A.
You can also view our full range of compass clinometers by clicking here.
Add to cart
Brunton Omni-Slope Inclinometer £190.00 ex VAT
- Illuminated Readout: Light piping gives a clear bright readout even in lowlight Precision
- Pendulum: Fast, accurate, smooth, dead-on. 180 degree range.
- All-In-One Scales: Degrees, percent grade, forestry chain, 1 degree resolution.
- Dimensions: 63.5 x 89 x 12.7 mm
- Weight: 335 grams
- Features: 1 Degree resolution Made: in the U.S.A.
You can also view our full range of compass clinometers by clicking here.
Add to cart
Brunton Standard Transit 0-360 (5020) £450.00 ex VAT
• Made in the USA in Riverton, Wyoming

• Newly designed body is CNC-milled and hard-anodized for simplicity and durability.

• The flat bottom with a non-slip silicon foot allows for low angle strike and dip measurements.

• Unobtrusive bottle opener that stays out of the way until needed.

• The mirror enables sighting and measurement of bearings and vertical angles.

• Short and long sights give the user additional functionality and accuracy when shooting bearings.

• The precision NdFeB disc magnet provides very accurate readings and resists demagnetization.

• Our magnetic needle can be balanced for use almost anywhere in the world.

• Induction dampening makes for a quick-settling needle.

• The sapphire jewel bearing allows for smooth needle movement throughout the life of the instrument.

• The needle lock button can lock or free the needle, depending on the model.

• The internal components are sealed with an O-ring for improved water and dust resistance.

• All transits are compatible with our Jacob’s Staff/Tripod ball and socket adaptor.

• This is the Azimuth (0-360) variant.

• Each comes with a protective leather case, perfect for carrying your Brunton in the field.

You can also view our full range of compass clinometers by clicking here.

Add to cart
Brunton Standard Transit Quad (5021) £450.00 ex VAT
• Made in the USA in Riverton, Wyoming

• Newly designed body is CNC-milled and hard-anodized for simplicity and durability.

• The flat bottom with a non-slip silicon foot allows for low angle strike and dip measurements.

• Unobtrusive bottle opener that stays out of the way until needed.

• The mirror enables sighting and measurement of bearings and vertical angles.

• Short and long sights give the user additional functionality and accuracy when shooting bearings.

• The precision NdFeB disc magnet provides very accurate readings and resists demagnetization.

• Our magnetic needle can be balanced for use almost anywhere in the world.

• Induction dampening makes for a quick-settling needle.

• The sapphire jewel bearing allows for smooth needle movement throughout the life of the instrument.

• The needle lock button can lock or free the needle, depending on the model.

• The internal components are sealed with an O-ring for improved water and dust resistance.

• All transits are compatible with our Jacob’s Staff/Tripod ball and socket adaptor.

• This is the Quadrant (0-90) variant.

• Each comes with a protective leather case, perfect for carrying your Brunton in the field.

You can also view our full range of compass clinometers by clicking here.

Add to cart
Brunton TruArc 15 £55.00 – £520.00 ex VAT
Technical Specification:
• Global needle
• Luminous cling ends
• Flip open full view sighting mirror
• Map magnifier
• Circular bubble level
• 1° Resolution with magnified readout
• Dimensions: .16 x 6.3 x 1.5 cm
• Weight: 91 grams

The Brunton TruArc 15 is a global, versatile compass clinometers suitable for a wide range of applications for an even wider range of users, from those who are keen on hiking and exploring, to geologists and geographers of student and professional level to surveyors. The TruArc 15 features an accurate global needle, clinometer needle, tool free declination adjustment and more.

You can also view our full range of compass clinometers by clicking here.

Select options
Sold Out

Brunton TruArc 20 £69.00 ex VAT
The Brunton TruArc 20 is a global, versatile compass clinometers suitable for a wide range of applications for an even wider range of users, from those who are keen on hiking and exploring, to geologists and geographers of student and professional level to surveyors. The TruArc 20 features an accurate global needle, clinometer needle, tool free declination adjustment and more and comes with USGS field data cards.

Technical Specification:
• Global needle
• Luminous cling ends
• Flip open full view sighting mirror
• Map magnifier
• Circular bubble level
• 1° Resolution with magnified readout
• Dimensions: .10.4 x 6.3 x 2.5 cm
• Weight: 102 grams

You can also view our full range of compass clinometers by clicking here.

Read more

Out of stock
Bulldog Chipping Hammer £9.00 ex VAT
A chipping hammer designed for versatility, this Bulldog model weighs 500g and features a fibreglass handle with a steel head. Its lightweight fibreglass shaft ensures easy handling, while the soft touch grip offers a secure hold during strikes. The 500g steel head, boasts both vertical and horizontal chisel edges, enhancing its adaptability for chipping and chiselling tasks. With a total weight of around 705 grams and a length of approximately 32 cm, this hammer combines efficiency and convenience.

Add to cart
Sold Out

C-thru W-45 1:2000 and 1:1500 Metric Protractor Ruler – 6″ £2.50 ex VAT
A transparent 180° protractor and ruler combination with 1:2000 and 1:1500 meter scales. Made from flexible laminated plastic.

Read more

Out of stock
Chartwell Book 2426 £19.17 ex VAT
Specifications:
- 192 x 120mm (7.5″ x 4.75″)
- 80 leaves (pages)
- Side opening
- Fully waterproof
- Printed in permanent ink
- 50% rag bond paper sewn with rot-proof thread
- Cover can be folded back flat
- Hard cover with rounded corners to save pocket wear
Add to cart
19 in stock
Chartwell Mining Book 2637 £20.83 ex VAT
Specifications:
- 192 x 120mm (7.5″ x 4.75″)
- 80 leaves
- Side opening
- Fully waterproof
- Large squares printed in permanent ink (5 mm x 5 mm graph)
- 50% rag bond paper sewn with rot-proof thread
- Cover can be folded back flat
- Hard cover with rounded corners to save pocket wear
Add to cart
Chartwell Mining Book 2647 £24.00 ex VAT
Specifications:
- 192 x 120mm (7.5″ x 4.75″)
- 80 leaves
- Side opening
- Fully waterproof
- Small squares printed in permanent ink (2 mm x 2 mm graph)
- 50% rag bond paper sewn with rot-proof thread
- Cover can be folded back flat
- Hard cover with rounded corners to save pocket wear
Add to cart
21 in stock
Chartwell Notebook 2006 £20.00 ex VAT
Produced by the highest specification using 50% rag bond paper which has high cotton linters content giving excellent tear resistance and strength when wet. 127mm x 203mm in size and contains 80 leaves. More info below.

Add to cart

13 in stock
Chartwell Notebook 2026 £14.42 ex VAT
Produced by the highest specification using 50% rag bond paper which has high cotton linters content giving excellent tear resistance and strength when wet. 127mm x 203mm in size and contain 80 leaves. More information below.

Add to cart

15 in stock
Sold Out

Chartwell Notebook 2056 £20.83 ex VAT
Produced by the highest specification using 50% rag bond paper which has high cotton linters content giving excellent tear resistance and strength when wet. It retains this strength and it’s writing surface when dried after being subjected to adverse site or weather conditions.

Read more

Out of stock
Chartwell Notebook 2200 £15.00 ex VAT
Produced by the highest specification using 50% rag bond paper which has high cotton linters content giving excellent tear resitance and strength when wet. 102mm x 165mm in size and contain 80 leaves. More information below.

Add to cart

19 in stock
Chartwell Notebook 2281 £13.25 ex VAT
This notebook by Chartwell is completely waterproof. It contains 50 leaves and is designed for the most damaging environments. The synthetic paper allows pen or pencil to be used on it and is tear resistant.

Add to cart
Chartwell Notebook 2291 £13.25 ex VAT
This notebook by Chartwell is completely waterproof. It contains 50 leaves and is designed for the most damaging environments. The synthetic paper allows pen or pencil to be used on it and is tear resistant.

Add to cart

12 in stock
Chartwell Survey Book 2126 £14.08 ex VAT
Specification:
- Ruled 2 red centre lines without feint
- 106 x 205mm (4″ x 8″)
- 80 leaves
- Top opening
- Fully waterproof
- Printed in permanent ink
- 2 vertical red lines down the midle section of the page
- 50% rag bond paper sewn with rot-proof thread
- Cover can be folded back flat
- Hard cover with rounded corners to save pocket wear
Add to cart
18 in stock
Sold Out
Chartwell Survey Book 2416 £19.17 ex VAT
Specifications:
- 192 x 120mm (7.5″ x 4.75″)
- 80 leaves (pages)
- Page Layout – Traditional Leveling scales and print
- Side opening
- Fully waterproof
- Printed in permanent ink
- 50% rag bond paper sewn with rot-proof thread
- Cover can be folded back flat
- Hard cover with rounded corners to save pocket wear
Read more
Out of stock
China Graph Pencils £7.20 ex VAT
China graph marker pencils made from hardened parafin wax for marking on a variety of surfaces such as glass, wood, ceramic and more available in a range of colours.

Explore our extensive collection of surface markers available here.

Select options
Clino Rule 1m £16.25 ex VAT
A 4 fold 1 meter clino rule made from robust ABS plastic for field and underground use on site, the rule is made of 4 segments at 25 cm each which fold out into a 1m ruler. The middle has a 0 – 180° inclinometer to assist in obtaining angles and height readings and a built in spirit level allows you to ensure you are obtaining level surface readings at all times.

Add to cart

25 in stock
Clip-on Lenses £7.00 ex VAT
A plastic lens which clips on to your spectacles with 5X magnification. Hands free, and great for use in the field or at home.

Add to cart

11 in stock
COCLA Stratum Compass (3180) £1,265.00 ex VAT
Technical Data:
– Compass circle diameter 50 mm
– Precision compass needle (balanced for zone 1 – magnetic north)
* Can be balanced for use in other zones. Done automatically upon purchase or request.
– Graduation interval 1° (1g)
– Accuracy < 0,1° (0,2g)
– Numbering continuous from 10° to 10° (10g to 10g)
– Declination adjustment ±30°
– Vertical circle diameter 25 mm
– Graduation interval of inclinometer 5° (5g)
– Readings to 1° (1g)
– Graduation range quadrantal 235°
– Numbering from 20° to 20° (20g to 20g)
– Circular level 30’/2 mm
– Tracing edge 60 mm
– Dimensions of closed compass 74x96x25 mm
– Includes leather case
– Weight 275g

You can also view our full range of compass clinometers by clicking here.

Add to cart
COSTU Geological Compass Clinometer £220.00 ex VAT
Technical Information:
- Needle: Northern hemisphere (can adjust for use in other magnetic zones)
- Die cast non magnetic body
- Drawing edge 110 mm
- Sighting mirror
- Gravity operated clinometer
- 90° +/-
- Rotatable compass
- Graduations: 5°
- Bubble level
- Accessories: Leather case
- Total weight: 122 grams
You can also view our full range of compass clinometers by clicking here.
Add to cart
Dino Head Double Hand Lens £2.00 ex VAT
This compact hand lens comes equipped with two magnifiers, each offering a 5x magnification. What sets it apart is the ability to overlap these magnifiers, providing a total magnification power of 10x. Crafted from durable plastic, the magnifier is built to endure accidental drops with no sharp edges or corners. Designed for children aged 6 and above who are developing an interest in nature, this practical magnifier allows both you and them to explore the intricate details of the outdoors, from plants and insects to small amphibians, rocks, and fossils. Ideal for educational and charitable organisations catering to young children. The black body features a white dinosaur logo to spark their curiosity.

Add to cart
Double Ended Nylon Brush £6.00 ex VAT
A wooden handled double ended nylon brush, ideal for cleaning out sieves after use.

Add to cart

20 in stock
Sold Out

Douglas Protractor 5 Inch £7.30 ex VAT
Handy mapping & measuring aid use in the office, field often used by: exploration geologists, land surveyors, forresters and on boats and yachts for navigational purposes.

Read more

Out of stock
Edding 370 Permanent Marker Pen £1.20 ex VAT
The Edding 370 permanent pen low odour ink field permanent marker pens. The pens have a 1mm tip which is bullet shaped. Perfect for use by geologists, archaeologists, paleontologists and surveyors out in the field.

Select options
Edding 750 Paint Marker £3.44 ex VAT
The Edding 750 Paint marker is a thick permanent marker pen using pigment ink with no added toluenexylene. Waterproof, quick drying ink. More information below.

Select options
Edding Mapping Pen (0.1 stroke) £2.99 ex VAT
0.1 stroke high-tech disposable fibrepen with metal-framed round tip, in 4 stroke widths, water resistant once dry, lightfast pigment ink. Includes cap with a stainless steel clip.
For more information please see below.

Select options
Edding Mapping Pen (0.3 stroke) £2.99 ex VAT
High-tech disposable fibrepen with metal-framed round tip, in 4 stroke widths, water resistant once dry, lightfast pigment ink. Includes cap with a stainless steel clip.
For more information see below.

Select options
Edding Mapping Pen (0.5 stroke) £2.99 ex VAT
High-tech disposable fibrepen with metal-framed round tip, in 4 stroke widths, water resistant once dry, lightfast pigment ink. Includes cap with a stainless steel clip.

Select options
Estwing Chisel Edge Hammer Holster £12.19 ex VAT
Estwing produced nylon hammer holster produced from industrial grade nylon which is tough for use in rugged conditions. This holster is suitable for use with Estwing chisel edge range of geological hammers and rock pick, with the head sitting securley in a pouch which attaches to your belt.

Add to cart
Estwing E-30 Geological Hammer £55.25 ex VAT
The Estwing E30 geological hammer is the companies classic design, it is made from a single piece of drop forged American steel with a leather bound handle. The head weighs 22 oz, (624 grams) and features a flat face with a pointed tip on the opposing side. This model is ideal for chipping, extracting and piercing rocks, sediments and minerals to remove or extract wanted material.

Technical Specification:
- Model – E-30
- Head weight – 624 grams (22 oz)
- Construction – Drop forge
- Material – American steel
- Finish: Brushed steel
- Handle – steel, bound in leather
- Edge – Pointed tip
- Made in the United States of America
Add to cart
10 in stock
Estwing E3 WC Chipping Hammer £45.00 ex VAT
Techincal Details:
Head Weight: 392g
Head Width: 7.5″
Overall Length: 11″
Total Weight: 550g

Add to cart

5 in stock
Estwing E3-14P Rock Pick £45.00 ex VAT
The Estwing E3-14P is the premier pointed tip geological hammer, made in the USA from a single piece of drop forged American steel, this hammer features a flat face for crushing and cracking rock along side a pointed tip which is excellent for prying, chipping rock as well as extracting minerals or crytsals from their matrix, where a delicate touch may be required. The handle is made from anti shock vinyl and features a loop hole to thread a lanyard through.

Add to cart
Estwing E3-20BLC Geological Hammer £49.55 ex VAT
The Estwing E3-20BLC is a 20 ounce (566 gram) geological hammer with a chisel edge head to cut, split or pry rocks or a flat face to break or crush material. The hammer is made from drop forged American steel with an anti-shock vinyl grip. An excellent hammer and the best in the industry, the Estwing E3-20BLC is the bench mark for geological hammers.

Technical Specification:
- Model – E3-20BLC
- Head weight – 566 grams (20 oz)
- Construction – Drop forge
- Material – American steel
- Finish: Brushed steel
- Handle – steel with anti-shock vinyl grip
- Edge – chisel edge
- Made in the United States of America
Add to cart
13 in stock
Estwing E3-22P Geological Hammer £49.55 ex VAT
The Estwing E3-22P is the premier pointed tip geological hammer, made in the USA from a single piece of drop forged American steel, this hammer features a flat face for crushing and cracking rock along side a pointed tip which is excellent for prying, chipping rock as well as extracting minerals or crytsals from their matrix, where a delicate touch may be required. The handle is made from anti shock vinyl and features a loop hole to thread a lanyard through.

Technical Specification:
- Model – E3-22P
- Head weight – 623 grams (22 oz)
- Construction – Drop forge
- Material – American steel
- Finish: Brushed steel
- Handle – steel with anti-shock vinyl grip
- Edge – Pointed tip
- Made in the United States of America
Add to cart
22 in stock
Estwing E3-23LP Geological Hammer (Long Handle) £55.03 ex VAT
The Estwing E3-23LP long handle geological hammer features a flat face for breaking and crushing rock along side a pointed tip for prying and chipping as well as careful extraction of fossils and crystals from matrix should you require. Constructed from a single piece of drop forged American steel, the hammers longer handle at 40 cm allows you to reach further as well as helping to deliver more force per strike.

Technical Specification:
- Model – E3-23LP
- Head weight – 616 grams (22 oz)
- Construction – Drop forge
- Material – American steel
- Finish: Brushed steel
- Handle – steel with anti-shock vinyl grip
- Edge: Pointed tip
- Extras: 40 cm shaft and handle
- Total weight: 935 g
- Made in the United States of America
Add to cart
8 in stock
Estwing E3-24BLC Geological Hammer £53.25 ex VAT
The Estwing E3-24BLC is a 24 ounce (680 gram) heavy geological hammer with a chisel edge head to cut, split or pry rocks or a flat face to break or crush material. The hammer is made from drop forged American steel with an anti-shock vinyl grip. An excellent hammer and the best in the industry, the Estwing E3-24BLC is the bench mark for geological hammers.

Technical Specification:
- Model – E3-24BLC
- Head weight – 680 grams (24 oz)
- Construction – Drop forge
- Material – American steel
- Finish: Brushed steel
- Handle – steel with anti-shock vinyl grip
- Edge – chisel edge
- Made in the United States of America
Add to cart
18 in stock
Estwing E30SE Geological Hammer £68.95 ex VAT
The Estwing E30SE is a 22 oz special edition geological hammer of the popular E30 model, it features a single forged pieces of American steel construction with a leather wrapped handle for shock absorption. The head weigh is 624 grams with a flat face and pointed tip for breaking ir picking at rocks, fossils or minerals. As a special edition piece, it features a black coated shaft and a tyrannosaurus-rex skull logo on the handle.

Technical Specification:
- Model – E-30SE
- Head weight – 624 grams (22 oz)
- Construction – Drop forge
- Material – American steel
- Finish: Matt black shaft and brushed steel
- Handle – steel, bound in leather
- Edge – Pointed tip
- Made in the United States of America
Add to cart
4 in stock
Estwing E6-22BLC Big Blue Geological Hammer £49.00 ex VAT
Estwing E6-22BLC is a moderately heavy geological hammer featuring a wider than usual flat breaking face for crushing material along with a wide chisel edge for cutting, chipping and prying material. Suitable for both hard and soft rock geology, the hammer is cast from a single piece of American steel and features the anti-shock grip with a blue colouration for easily visibility. The hammer offers a hefty weight giving excellent force per strike along with suitable control.

Technical Specification:
- Model – E3-22BLC
- Head weight – 566 grams (22 oz)
- Construction – Drop forge
- Material – American steel
- Finish: Steel, painted blue.
- Handle – steel with anti-shock vinyl grip
- Edge – wide chisel edge
- Made in the United States of America
Add to cart
2 in stock
Estwing E6-24PC Big Blue Geological Hammer £59.76 ex VAT
The Estwing E6-24PC geological hammer, also known as the ‘Big Blue’ hammer is a pointed tip strike tool which features a wider flat face, delivering more force per strike, making breaking and crushing of rock much easier. It also features a pointed tip, suitable for picking and prying material as well as allowing careful extraction of fossils or crystals from matrix. The hammer is made from a single piece of drop forged American steel and utilises a anti shock vinyl handle for comfort.

Technical Specification:
- Model – E6-24PC
- Head weight – 737 grams (24 oz)
- Head Face: 1 1/8″
- Construction – Drop forge
- Material – American steel
- Finish: Steel, painted blue
- Handle – steel with anti-shock vinyl grip
- Edge – Pointed tip
- Made in the United States of America
Add to cart
1 in stock
Estwing EB3/2LB Crack Hammer £42.86 ex VAT
Estwing EB3/2LB is a 2 lb (896) weight hammer with a short handle and two flat faces on the head. It is ideal for heavy duty tasks where damage is required over preservation. As such, this model of hammer is more suitable for professionals rather than students as it’s heavy weight can make it unwieldly in untrained hands.

Technical Specification:
- Model – EB3/2LB
- Head weight – 896 grams (2 lb)
- Construction – Drop forge
- Material – American steel
- Finish: Steel, coated blue
- Handle – steel with anti-shock vinyl grip
- Edge – two flat faces
- Made in the United States of America
Add to cart
Estwing EB3/3LB Crack Hammer £42.86 ex VAT
Estwing EB3/3LB is a 3 lb (1300 gram) weight hammer with a short handle and two flat faces on the head. It is ideal for heavy duty tasks where damage is required over preservation or for use on parts on heavy duty machinery. As such, this model of hammer is more suitable for professional geologists and machinists rather than students as it’s heavy weight can make it unwieldly in untrained hands.

Technical Specification:
- Model – EB3/3LB
- Head weight – 1300 grams (3 lb)
- Construction – Drop forge
- Material – American steel
- Finish: Steel, coated blue
- Handle – steel with anti-shock vinyl grip
- Edge – two flat faces
- Made in the United States of America
Add to cart
Estwing EB3/4LB Crack Hammer £47.72 ex VAT
Estwing EB3/4LB is a 2lb (1800 grams) weight hammer with a short handle and two flat faces on the head. It is ideal strictly for heavy duty tasks where damage is required over preservation or for work on heavy duty plant machinery. As such, this model of hammer is more suitable for professionals only as opposed to use by students. The handle features a anti shock vinyl grip handle which offers comfort as well as being easily visible should you misplace it.

Technical Specification:
- Model – EB3/4LB
- Head weight – 1800 grams (4 lb)
- Construction – Drop forge
- Material – American steel
- Finish: Steel, coated blue
- Handle – steel with anti-shock vinyl grip
- Edge – two flat faces
- Made in the United States of America
Add to cart
Estwing EB3/4LBL Crack Hammer (Long Handle) £53.25 ex VAT
Estwing EB3/4LBL is a 4 lb (1800 gram) heavy weight hammer with a long handle and two flat faces on the head. It is suitable for professional use only for heavy duty tasks such as hard rock breaking and crushing at the expense of control as well as for use on plant machinery. Manufactured in the USA from American steel using Estwings drop forge technique, the hammer delivers devastating blows with each strike. The handle is made from anti shock vinyl which offers both comfort and visibility should you accidentally misplace the hammer.

Technical Specification:
- Model – EB3/4LBL
- Head weight – 1800 grams (4 lb)
- Construction – Drop forge
- Material – American steel
- Finish: Steel, coated blue
- Handle – steel with anti-shock vinyl grip
- Edge – two flat faces
- Features: long handle, 15.7 inches
- Made in the United States of America
Add to cart
2 in stock
Estwing geo Paleo Pick Hammer EGP100 £137.21 ex VAT
Technical Specification:
- Model – EGP100
- Total weight: 1.8 kg
- Total length: 64 cm
- Construction: Drop forge
- Material – American steel
- Finish: Steel, coated blue
- Handle – steel with anti-shock vinyl grip
- Edge – Chisel end, tapered and pointed tip
- Made in the United States of America
Add to cart
Estwing Pointed Tip Hammer Holster £12.19 ex VAT
Estwing produced nylon hammer holster produced from industrial grade nylon which is tough for use in rugged conditions. This holster is suitable for use with Estwing pointed tip range of geological hammers and rock pick, with the head sitting securley in a pouch which attaches to your belt.

Add to cart

1 in stock
Sold Out

Explorer Map Case £7.00 ex VAT
• Rip stop polyester fabric
• Large 25 x 27 cm waterproof map viewing window
• Adjustable and detachable shoulder strap
• Numerous pouches and pockets, velcro and zipped.
• Folded: 15 x 29 cm
• Open: 42 x 29 cm
• Colour: black

Handy Explorer map case made with rip stop polyester, featuring a compact size when closed and fairly adequate when opened, the case features velcro pockets for pencils, compasses and whistles as well as a large waterproof map viewing window and a large zipped pocket. Available in black, it also comes with a shoulder strap, ideal for use by hikers and for field studies.

Read more

Out of stock
Faithfull Pointed Tip Geological Hammer – Hickory Shaft £24.40 ex VAT
An excellent economical geologist pick rock hammer for use when undertaking field work. This tool is ideal for the breaking or rocks or massive mineral as well as the extraction of crystals or fossils from matrix. It weighs in at 866 grams, with a head weight of 624 grams (1 lb) and an overall length of 331 mm. Making it small and lightweight to take anywhere without encumbering one too much. The handle is constructed from solid hickory wood which is an excellent shock absorber and has a comfortable grip for long use.

Add to cart

28 in stock
Faithfull Short Handled Geological / Brick Hammer (Hickory Shaft) £16.48 ex VAT
An inexpensive short handled geological hammer, features a large square striking face with the opposing end shaped as a long tapered horizontal chisel for cutting a line around the
Circumference of any masonry or for simply splitting rock along planes of weakness. In masonry, after the cutting line is completed, a sharp blow with the striking face produces a clean cut. The handle is genuine hickory, which is ideal for reducing the amount of shock produce with each strike delivered. Indeed, this is a high quality tools made by Faithful tools in England.

Add to cart

3 in stock
Field Data Cards Pack £6.30 ex VAT
Geological field data card pack, numerous cards for use in the field, ideal if you work or study in the sectors of earth science. Cards supplied are a grain size card, 3 rock texture cards, igneous, metamorphic and sedimentary, a field scale and specimen cards. An excellent pack ideal for students and professionals alike.

Add to cart
Field Scale Card £0.69 ex VAT
Field scale card, completely waterproof, features 10 cm scale, 4 inch scale and 30 mm scale for use when taking photographs in the field.

Add to cart
Folding Sit Mat £6.66 ex VAT
Select options
Fossil Specimen Cards (25 cards) £1.25 ex VAT
Fossil specimen sample cards, these cards are blank having spaces for you to write the ‘name’, ‘age/horizon’ and ‘locality’ of a rock specimen or specimens collected. Ideal for conducted field work or cataloging your collection. 73mm x 46mm.

Add to cart

3913 in stock
Garmin Etrex 22x GPS £180.00 ex VAT
Discover with assurance using the dependable portable GPS device.
- Featuring a 2.2″ display, the GPS offers a sunlight-readable color screen.
- Equipped with preloaded TopoActive Europe maps, including routable roads and trails for cycling and hiking.
- With support for both GPS and GLONASS satellite systems, the GPS can track your location even in challenging environments.
- Boasting 8 GB of internal memory, the device allows you to download additional maps, and a microSD™ card slot provides expandable storage options.
- Powered by 2 AA batteries, the GPS offers an impressive battery life of up to 25 hours in GPS mode.
Please note there may be a couple of days lead time for this product.
Add to cart
Garmin Etrex 32x GPS £250.00 ex VAT
Embark on your explorations with confidence, guided by the trustworthy handheld GPS device.
- Featuring a 2.2″ display, the GPS boasts a sunlight-readable color screen.
- It comes preloaded with TopoActive Europe maps, offering comprehensive routes for cycling and hiking.
- With support for both GPS and GLONASS satellite systems, this GPS device excels in tracking your location, even in challenging environments.
- Equipped with 8 GB of internal memory, you can easily download and store additional maps to enhance your navigation experience.
- The eTrex 32x model takes it a step further by adding a 3-axis compass and barometric altimeter, providing you with accurate orientation and elevation data for more precise navigation.
- Powered by 2 AA batteries, the GPS ensures a remarkable battery life of up to 25 hours in GPS mode.
Please note there may be a couple of days lead time for this product.
Add to cart
Garmin GPS MAP 65s £400.00 ex VAT
Experience enhanced exploration with this durable handheld device, delivering exceptional tracking precision, a 2.6-inch vibrant color display, and convenient preloaded maps.
- Immerse yourself in the details with the generous sunlight-readable color display, providing optimal visibility even in bright outdoor conditions.
- Conquer demanding terrains confidently, thanks to the multi-band technology and expanded GNSS satellite support, enabling precise tracking in challenging locations.
- Navigate the countryside effortlessly with the included routable TopoActive Europe maps, ensuring you have reliable guidance for your outdoor adventures.
- Stay on course with the built-in navigation sensors, allowing you to plot your next move accurately and efficiently.
- Enjoy extended travel time with up to 16 hours of battery life in GPS mode.
Please note there may be a couple of days lead time for this product.
Add to cart
GEBRU Transit Compass Clinometer (3032) £633.00 ex VAT
Technical Specification:
– Stratum compass
– Vertical inclinometer with 1° graduations, visible from side and above
– Dip measuring range 270° graduated in 1°
– Brunton style spirit level clinometer +/- 90°, 1° graduations
– Azimuth circle with 1° graduations
– Global needle
– Needle locking mechanism
– Declination adjustable +/- 60°
– Inclination adjustable
– Circular spirit level for horizontal accuracy
– Sighting mirror
– Rugged, light weight aluminised one piece waterproof housing
– Dimensions (closed) 72 x 93 x 27.5 mm
– Weight: 330 grams

Add to cart
GEKOM N Pro Compass Clinometer (3031) £504.00 ex VAT
TTechnical data:
– Azimuth dial: diameter 60 mm
– Inner circle diameter 48 mm with interval of graduation 2°
– Reading by estimation 1°
– Numbering every 10°
– Declination adjustment up to 360°
– Declination adjustment without opening the instrument housing
– Dip measuring range 270° graduated in 5° intervals
– Global Magnetic needle red/black
– Gravity driven clinometer
– Hinge inclinometer
– Needle locking mechanism
– Circular spirit level
– Ruler 50 mm
– One piece waterproof housing
– Dimensions of closed compass (mm) 86 x 70 x 20
– Total weight 240 g

You can also view our full range of compass clinometers by clicking here.

Add to cart
GEKOM Pro Stratum Compass (3030) £467.00 ex VAT
Technical data:
– Azimuth dial: diameter 60 mm
– Inner circle diameter 48 mm with interval of graduation 2°
– Reading by estimation 1°
– Numbering every 10°
– Declination adjustment up to 360°
– Declination adjustment without opening the instrument housing
– Dip measuring range 270° graduated in 5° intervals
– Global Magnetic needle red/black
– Needle locking mechanism
– Circular spirit level
– Ruler 50 mm
– One piece waterproof housing
– Dimensions of closed compass (mm) 86 x 70 x 20
– Total weight 240 g

You can also view our full range of compass clinometers by clicking here.

Add to cart
GEO Double Hand Lens £4.60 ex VAT
The GEO double hand lens offers both standard and high magnification options, providing a wide field of view. It features two lenses on opposite sides. One offers 10x magnification with an 18mm viewing field, while the other provides a more powerful 20x magnification with a smaller 12mm viewing field. This ensures strong magnification without distortion. Made with chrome-plated stainless steel for both the lenses and the body, this versatile lens is suitable for observing various subjects like rocks, fossils, minerals, and plant matter. The 20x lens excels in detailed examination, enabling you to view sediments, insects, and other minute objects. It’s worth noting that these lenses are not triplets or composed of five elements, as confirmed by the manufacturer. They are standard single glass optics. If you come across the same model being sold with different claims, be aware that the information is inaccurate.

Add to cart
GEO Hand Lens 10X 18 mm £2.50 ex VAT
Introducing a high-quality hand lens offering 10x magnification with an 18 mm diameter viewing field. This lens is perfect for beginners or budget-conscious students. It features a durable brass body with a sleek chrome finish, built to withstand use. Its compact size is ideal for examining minute details in earth science studies, such as mineral composition, crystal structures, and fossil morphology. Beyond earth science, this versatile lens can benefit entomologists, sedimentary geographers, botanists, and more. Additionally, it features a small loop for attaching a lanyard if desired. Bulk discounts are available. Please enquire via email if you are interested.

Add to cart

21 in stock
GEO Hand Lens 10X 21 mm £2.80 ex VAT
Introducing a high-quality hand lens offering 10x magnification with a generous 21mm diameter viewing field. This lens is perfect for beginners or budget-conscious students. It features a durable brass body with a sleek chrome finish, built to withstand use. The broader viewing area is perfect for examining a larger range of minute details encountered in earth science studies, such as rock specimen mineral composition, mineral crystal structures, and precise fossil morphology. Beyond earth science, this versatile lens proves invaluable for entomologists, sedimentary geographers, botanists, and more. Additionally, it features a small loop for attaching a lanyard if desired. Bulk discounts are available. Please enquire via email if you are interested.

Add to cart
GEO Premier Triplet Hand Lens (10x 20.5mm) £13.95 ex VAT
Introducing the GEO Premier, an authentic triplet hand lens crafted from top-grade triplet optical glass. It features three distinct layers of glass and provides a 10x magnification with 20.5 mm viewing field. This ensures a comprehensive view of a sample’s specific area. Housed in sturdy metal, it is built to withstand rugged field use, capable of enduring bumps and drops. The hexagonal shape enhances grip and handling, especially in damp conditions. Additionally, one end of the magnifier features a bar and metal loop for attaching a lanyard or thread (not included). The hand lens includes a leather case and stands as an outstanding tool suitable for both students and professionals alike.

Add to cart
GEO Premier Triplet Hand Lens (20x 20.5mm) £15.95 ex VAT
Introducing the GEO Premier, an authentic triplet hand lens crafted from top-grade triplet optical glass. It features three distinct layers of glass and provides a precise 20x magnification with 20.5 mm viewing field. This ensures a comprehensive view of a sample’s specific area. Housed in sturdy metal, it is built to withstand rugged field use, capable of enduring bumps and drops. The hexagonal shape enhances grip and handling, especially in damp conditions. Additionally, one end of the magnifier features a bar and metal loop for attaching a lanyard or thread (not included). The hand lens includes a leather case and stands as an outstanding tool suitable for both students and professionals alike.

Add to cart

19 in stock
Geological Mapping and Sedimentary Logging Reference £1.10 ex VAT
A5 in size, the card contains relevant geological data on both sides. One side contains over 40 different sedimentary logging symbols such as ‘Breccia’, ‘cross bedding’, ‘tuff’, and so forth.. On the opposite side, a wide variety of common geological mapping symbols are printed including ‘inclined strata’, ‘faults’, ‘mineral veins’ etc. Also includes a geological time scale.

Add to cart
Grain Size Card £1.55 ex VAT
The card is printed onto translucent plastic for easy reading and comparing against grain size and texture in the field. The card includes a sorting chart, roundness scale and percentage by area images and is 149mm x 72mm, made from plastic it is completely waterproof and tear resistant.

Add to cart

Information

Categories

Weekly Newsletter